Why PETG good for cabinet panels?

The cabinet panel is good with the PETG, and it is not easy to scratch.Now many people use pet materials to make cabinet doors and cabinets. The quality of pet cabinets is guaranteed and there are many advantages. The following xilu petg board will give you a brief introduction to pet materials for cabinets and the advantages and disadvantages of pet cabinet doors. Let’s find out together.

Advantages of PETG Board:

1. Anti-scratch and wear-resistant, the film’s surface are scratched with nails without leaving traces, and the surface color does not change or fade after frequent washing.
2. It is easy to form. The door panel processed with this film has a good three-dimensional effect, and the film at the groove does not rebound, shrink, or turn white at the corners.
3. Easy to decontaminate, the film’s surface does not generate static electricity during the washing and control process and is not easy to adhere to dust. Oil stains and stains on the surface can be removed immediately with ordinary cleaners within 12 hours.
4. No chromatic aberration or discoloration, and the same product’s color, surface effect, and pattern are consistent every time. The molded door panels have been used indoors with no color change for 20 years. Moisture and temperature resistance can be used in humid environments that do not exceed 85°C.

Different sheets of PET:

1. Wood-plastic is a wood-plastic composite material, which refers to the use of polyethylene, polypropylene, and polyvinyl chloride, etc., instead of the usual resin adhesive, mixed with more than 35%-70% of wood flour, rice husk, straw, and other waste plant fibers It is a new wood material. Then, the board or profile was produced through extrusion, molding, injection molding, and other plastic processing processes.
2. The blister board is a colorless or slightly yellow thermoplastic engineering plastic with no obvious melting point. It is in a molten state at 220-230 °C. The surface has good flatness and is easy to shape. After molding with engraving and milling patterns, the patterns are various and have a three-dimensional sense. Scratch, heat, stain, and fade resistant.
3. Pet blister has excellent transparency and smoothness, good display effect, excellent surface decoration performance, can be printed without surface treatment, easy to press patterns, easy to metal treatment, and good barrier performance to oxygen and water vapor, but its thermal melting point is higher.

Due to the high level of craftsmanship and rejection rate, the price of the lacquer panel remains high; it should also be carefully cared for when used for fear of bumps and scratches. Once damaged, it is difficult to repair and needs to be replaced as a whole; There is a color difference, so it is recommended to use a pet panel.

For more information on cabinets, XILU plywood is recommended. If you want to know more about PET sheet, please contact us